Iron-on Instructions

Pour les instructions en français, voir ci-dessous

 

Ready to add your new patch to your bag, jacket or cap?

These instructions will get you there.

1. Choose an item suitable for ironing your patch to. Don't iron your patch to materials that will easily melt or have been treated with a water-resistant coating.
2. Set iron to high (cotton) setting
3. Turn off the steam function
4. Place the patch face-up on the item to be affixed to
5. Cover your patch with cotton fabric or cloth
6. Hold the hot iron down firmly over your patch for 20 seconds.  If you can, use the tip area of the iron to add more concentrated force on the patch.
7. Allow patch to cool for 3 minutes
8. If possible, turn the item over and hold the iron firmly on the back of the patch for 20 seconds.  This will draw the glue into the item fabric.

Full adhesion takes up to 48 hours, so try to avoid the temptation to test the edges of the patch.  This will break the adhesion, and cause failure.

If surface of patch seems "lumpy" (especially with the custom name tag) add heat using the iron like above, then add pressure with your thumb or finger to the affected area. CAUTION - IT WILL BE HOT!.  This will help to affix the iron on adhesive better in that area, and will result in a smoother application.

Some materials won't take the iron-on adhesive well.  We have tried to find the best adhesive available, but sometimes it just doesn't work.  If your patch doesn't stick, or if the item is to be washed or used frequently (like a backpack or ball cap), sewing is highly recommended. 

A sewn-on patch will last through much more wear and tear over time


 

Prêt à ajouter votre nouveau patch à votre sac, veste ou casquette ?

Ces instructions vous y mèneront.

1. Choisissez un article adapté au repassage. Ne repassez pas votre patch sur des matériaux qui fondent facilement

2. Réglez le fer sur réglage élevé (coton)

3. Éteignez la fonction vapeur

4. Placez le patch face vers le haut sur l'élément à apposer sur

5. Couvrir le patch avec du tissu/tissu en coton

6. Maintenez fermement le fer sur le patch pendant 20 secondes.

7. Laisser le patch refroidir pendant 3 minutes

8. Si possible, retournez l'article et maintenez le fer fermement au dos de l'écusson pendant 20 secondes. Cela attirera la colle dans le tissu de l'article.

Certains matériaux ne prendront pas bien l'adhésif thermocollant. Nous avons essayé de trouver le meilleur adhésif disponible, mais parfois cela ne fonctionne tout simplement pas. Si votre patch ne colle pas, ou si l'article doit être lavé ou utilisé fréquemment (comme un sac à dos ou une casquette), la couture est fortement recommandée.

Le fil est inclus avec chaque patch. Un patch cousu durera beaucoup plus d'usure au fil du temps.